mind your beeswax

Beeswax is Just the Beginning We've recently added a new editorial team for our sister publication, Stitch, to our Sudbury, Mass., offices. Among the getting-to-know-you questions asked between the new and pre-existing staff members is, “What kind of art do you make?" Followed closely by, “Oh, can you teach me about that?” One of the techniques Assistant Editor Rose DeBoer (who sews and knits) would like to learn more about is encaustic collage and painting. Cloth Paper Scissors Editor Jenn Mason and I promised to bring in some examples to show her. I also referred Rose to Jenn's week of blog posts on encaustic painting and collage, beginning with encaustic basics; moving on to encaustic supplies and tips from the pros (with tips from Amy Stoner, Patricia Seggebruch, and Crystal Neubauer); covering encaustic painting inspiration; and finishing up with some of Jenn's own encaustic collage work to show the variety of techniques you can explore in encaustic art. The following is an excerpt from that last blog post. Jenn writes: In this series, I’m working with just small Encausticbords. These are thin wood boards prepared with an encaustic gesso. The small size (about the size of a baseball card) makes for an unintimidating day of experimentation.     Try to Resist Me   Truly, Madly, Dearly   An Extravagant Waste           Old envelope front was adhered to wood with gel medium (on the back side only). ”Sender” was stamped on the envelope Encaustic medium was brushed over the surface. 3 wax hearts were “painted on to the surface with a metal encaustic tool dipped into melted wax and then quickly painted onto the surface. Old resistors were bent and attached using both encaustic medium and charcoal gray wax.   Surface was stamped using a heat-moldable foam stamp and alphabet stamps. Part of a letter was layered on with gel medium (back side only). A coat of encaustic medium was added. A stripe of white wax was painted on. A Red heart was painted on as in “Try to Resist Me.” An awl was used to carve into the cooled wax and an oil stick is rubbed over the carving. The excess color was removed leaving color in the carved areas.   Surface was painted with a coat of encaustic medium. A small white rectangle was painted on the top left corner using a stencil. Layers of colored wax and encaustic medium were layered concentrating in the bottom left corner. Small scrap of paper were embedded in the encaustic medium. 2 small washers were added with encaustic medium. Metal encaustic tool was used to carve out small craters of wax revealing the build up of layers. Jenn’s List of Try-able Techniques Add lots of thin layers of encaustic paint (wax) in drips and brush strokes then carve away craters to reveal the layers Cover a board with paper collage using gel medium on the back side only and cover with encaustic medium for a faded look. Add extra bits of scraped away wax to another piece and heat with a heat gun to fuse. Fuse a little longer than necessary to break up the paint and reveal the layers below. Stamp your surface to create the base layer for your painting. Add a little bit of text under one or two layers of encaustic medium and then cover with encaustic paint. When dry, scrape away the paint to reveal the words underneath Scrape or scratch a pattern into the wax and color over it with an oil stick. Wipe off the excess color so that the color remains only in the wax. Use encaustic medium to embed found objects in your piece. Jenn's blog series on encaustic art has me even more eager to show Rose the possibilities of encaustic medium and collage. I think I'll have her start with Amy Stoner's excellent Cloth Paper Scissors Workshop video primer Encaustic Collage: Layers with Beeswax. Then maybe we'll have an after-work encaustic party. And, if I'm lucky, Rose will teach me how to read a knitting pattern.

Cate Prato, Online Editor Cloth Paper ScissorsToday

Diego Rivera Murals Return to New York after Eight Long decades

http://www.voanews.com/english/news/arts-and-entertainment/Eight-Decades-Later-Diego-Rivera-Murals-Return-to-New-York-135055638.html

Vanity Fair Collage.

Lune Vintage: Black Friday, Cyber Monday SALE at Lune Vintage!

Lune Vintage: Black Friday, Cyber Monday SALE at Lune Vintage!: Good News! Yeah, we're Canadian, but how could we not join in on the biggest retail sale time of the year with our American friends? I ...

vintage clothing headed for landfills

http://community.seattletimes.nwsource.com/archive/?date=20070225&slug=pacificpink25

altered tin with wax

You don't need rain to rust! Just sand them down and set them outdoors in a dish of water... salt water or a bit of ammonia in the water will help age the metal faster. You don't need a BBQ, make a little twig fire in an old cookie tin or set them on a rock and take a torch to them. There's a lot of ways to prep and many variations on the standard methods depending on your equipment, time needed etc... 
much depends on what you want your final result to be. Even if you are just going to glue papers on, a good sanding will help your glue adhere over the long run. My favorite glue for paper to metal is "WeldBond" but many others probably work just as well. 

One small tip that I like to remind people of... (and you'd be surprised how many times the comment comes up "My tin won't close/open now that I've altered it"... 
No matter what you do to the rest of the tin, be sure to keep the inside edge of the lid clean as well as the upper lip portion of the bottom of the tin. That includes the area in the back by the hinges, as well. Sand them down extra if needed and don't add any paint or finishes to either lip.